Sticker electrode with wire 50 x 50mm pack 4

How to use

• Make sure that the bag contains all the electrodes and the gel is intact.
• If the packets are visibly damaged or dented, you should not use the product.
• Choose an area free of hair, injuries or scars, leftovers on the skin or bone protuberances, never near metal prostheses.
• Clean and dry the application surfaces.
• Avoid the use of solvents as they can cause skin irritation and reduce adherence to the electrode.
• If alcohol is used, make sure it evaporates or dries out completely before applying the electrodes.
• Connect the electrode to the electro-stimulator cable.
• Only use equipment specifically designed for electro-stimulation with low intensity currents. Do not exceed the intensity of 0.1 Watts/cm2.
• Check the function the system is in before starting the procedure.
• Remove the film and apply the electrode to the skin surface.
• During the procedure, always select the lowest energy level.
• After the session, disconnect the electro stimulator, disconnect the cable from the electrode and gently remove it by pulling it from one end.
• After use, place them in the plastic holder and insert them in a bag.

Precautions

• The electrodes can be reused in the same patient.
• The device must be used by a qualified professional.
• Read the package insert before use.

Contraindications

The product must not be used: - If you notice changes in the gel, if there is visible damage to the electrodes or the connecting cable; - If the gel is dry or not homogeneous; - If the contact between the electrode and the skin is incomplete or unstable; - In pregnant women; - In epileptic patients; - In pacemaker carriers; - In subjects with progressive episodes of skin irritation or allergies.

Storage

The product must be kept in its original packaging, in places with environmental conditions, temperature and relative humidity, specified on the packaging label.